Browse all practice questions for the Search and Extractor Exam 1 Practice. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Search and Extractor Exam 1 Practice course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What is a figure-eight follow through knot used for?
  • What describes the cold zone?
  • Which type of respiratory protection is open circuit?
  • Which harness is worn around the waist and used to secure the rescuer to a stationary object for fall protection?
  • What should be included when requesting air support?
  • What is the water knot used for?
  • Which term describes the free end of the rope used for hauling if needed?
  • Which of the following correctly matches the tensile values for tubular and flat webbing as given?
  • In a rope of 1/2 inch diameter, the knot must have no bends smaller than how many inches to prevent efficiency loss?
  • What is the size of the landing zone at night?
  • Which NFPA guideline is used for risk/benefit analysis?
  • Which statement best describes Class III harness usage?
  • Size up is the actions of who?
  • Overhand safety is not required on which knot?
  • What is a resource cache?
  • Which ICS form is used to document incident objectives?
  • What is the tensile strength threshold listed for nylon rope?
  • During termination, which action is a responsibility of the US&R Team Leader?
  • Disposal methods of PPE must comply with which organization?
  • Which ICS form records the activity log prepared by all sections and units?
  • Which of the following is NOT a component of the SAR?
  • Which statement best describes Class II harness usage?
  • Which of the following is listed as an operations resource that may be needed?
  • What are the two parts of a rope described in the material?
  • ICS 209 Incident Status Summary is prepared by which groups?
  • Which document is the Emergency Response Guide used during hazmat incidents?
  • Ear protection may interfere with what?
  • Which knot on a rope is used as an anchor knot that creates a fixed loop that won't slip when tied on a bight?
  • Which term describes the portion of rope that lies in the middle and does not participate in tightening, located between the ends?
  • The sharper the bend, the ____ the efficiency loss.
  • Which statement correctly describes Type III helicopters?
  • Which of the following is an example of airborne contaminants?
  • When obstacles are in the approach or departure routes on a ___ to __ ratio must be used to lay out the landing site (___ to ___ at night).
  • Which role is responsible for ensuring personnel accountability and proper PPE during rescue operations?
  • Which type of rope is not recommended for rescue according to the material?
  • Is an overhand safety knot required on a figure-eight on a bight?
  • Which ICS form is used to capture an operational planning worksheet in the incident command system?
  • Which statement describes the criteria for communicating with other professionals?
  • What is the clove hitch (middle of the rope) used for?
  • What is a figure eight on a bend used for?
  • What is a figure-eight on a bight knot used for?
  • Fall factor= ______/_______.
  • Rescue Specialist responsibilities on the task force include which of the following?
  • Which marker is used to designate the landing zone?
  • What organization defines the roles, responsibilities and standard operating procedures used to manage emergency operations?
  • Rescue Specialist reports to which individual?
  • During night operations, the ratio used to lay out the landing site is
  • Headsets or earmuffs provide what?
  • Where does the equipment retrieval process begin?
  • Which ICS form is the Incident Radio Communications Plan?
  • Gloves used for technical rescue must meet the requirements established by what?
  • Which ICS function is responsible for obtaining needed resources and equipment?
  • Fall factor is defined as distance fall divided by length of rope between object and anchor.
  • Which task involves establishing search boundaries by assessing the perimeter surrounding the incident to determine possible victim location?
  • Depending on the nature of the incident it may be necessary for rescuers to wear what?
  • Given a breaking strength of 9000 lbs and a load of 600 lbs, the component safety factor is what?
  • Life safety equipment will be manufactured to maintain a component safety ratio of ___ to ___.
  • What are the types of atmospheric hazards?
  • A typical harness for rope work is made of __________ which has a breaking strength of ______ to ______ lbf.
  • Which statement best describes which item is NOT included in relay information during size-up?
  • What does it mean to dress the knot?
  • Which ICS section handles all support requirements needed to facilitate incident management?
  • Which standard addresses the competence of responders to hazmat/WMD incidents?
  • Which ICS form is the support vehicle/equipment inventory prepared by the NCOIC?
  • For oxyacetylene or gasoline fueled cutting operations what shade rating should the eye protection be?
  • The number one accountability system is through what?
  • Which clock positions correspond to the sides around the helicopter?
  • What is the maximum slope angle, in degrees, on which helicopters can land?
  • When controlling crowds what should be used?
  • Which statement describes establishing lines of communication and hazard-zone maneuver protocols?
  • ICS 204 Assignment List is prepared by which positions?
  • NFPA 1670 covers what aspect?
  • NFPA 1006 is the standard for the qualifications of which role?
  • Which standard addresses life safety rope and equipment used by emergency responders?
  • Which PPE category protects the feet?
  • What determines the efficiency ratings of knots?
  • What average percent efficiency is lost with each knot?
  • Which tool is described as cameras (fiber optics)?
  • What is the 4-to-1 rule?
  • NFPA 1983 covers life safety rope and equipment for emergency use.
  • If the ground slope is between 8 and 15 degrees, how should the aircraft land?
  • NFPA 1983 elongation standard specifies elongation measured at 10% of breaking strength. What is the maximum elongation?
  • Which items are listed as types of physical hazards?
  • Rescue Team Area is comprised of which personnel?
  • NFPA 472 addresses which area?
  • Which tool is described as thermal imagers (differences in temp)?
  • Which ICS form is used for resource status changes prepared by all sections and units?
  • Which type of physical search is more detailed and thorough than the initial search?
  • PAPR filters are only sufficient when oxygen levels are above what?
  • What is a double fishermans knot used for?
  • What are the five major functional areas of the Incident Command System (ICS)?
  • How many personnel comprise the LZ team responsible for establishing and securing the touchdown site?
  • Which role is responsible for PPE, rest cycles, rotations, and rehabilitation during rescue incidents?
  • Class I harness description
  • What is the minimum load for Type III helicopters?
  • What does safety the knot refer to?
  • During the size-up phase, which group should be kept aside?
  • Who does the US&R NCOIC report to?
  • What is the figure-eight knot used for?
  • Protective clothing for technical rescue applications must meet the standards established in what?
  • Which statement about Type II helicopters is true?
  • In a CBRNE incident, to which officer or section do US&R report to receive mission objectives?
  • Which NFPA standard focuses on technical rescue operations and training?
  • ERG stands for what guidance document in emergency response planning?
  • Which role is responsible for accountability and maintenance for all issued equipment and assigned personnel?
  • DO NOT attach live loads to the ___________ loops
  • Is the overhand knot load bearing?
  • During termination, which task describes the role of Safety Officers?
  • What is a potential disadvantage of earplugs?
  • Which of the following is NOT listed as a load-bearing hardware type for typical harness systems?
  • NFPA 1983 elongation standard specifies elongation measured at 10% of breaking strength. What is the minimum elongation?
  • Which professionals are listed as potential subject matter experts for developing the IAP?
  • Which term refers to the middle of the rope between the working end and the running end?
  • Which statement correctly describes Type II helicopters?
  • Which items are included in the relay information portion of the size-up?
  • Identify the respiratory protection that is an SCBA.
  • For earplugs most have an NRR of at least ____ dB and some exceed ____ dB.
  • Side positions are 9 and 3 o'clock how many yards from the rotor?
  • The two general categories of technical rescue disciplines identified in NFPA 1006 are:
  • A carabineer rated at 9000lbs. breaking strength has a force of 600lbs. There is a ____ to ___ component safety factor (9000/600).
  • Per NFPA regulations, the one-person load is rated at how many pounds?
  • The overhand knot is not suitable for which two purposes?
  • Which term describes the outer layer of rope as used in the material?
  • NFPA regulations specify that a one-person load is 300 lbs and a two-person load is 600 lbs.
  • What is the maximum NRR value some earplugs exceed?
  • Only what class harness offers full security for rescuers in all environments?
  • Fall factors greater than 0.25 are not acceptable for which rope type?
  • Which task involves identifying possible victims last reported locations?
  • Which PPE item must conform to NFPA 1951?
  • What are the hazard categories?
  • Which task is included in the basics of scene size-up?
  • Which action is included in the basics of scene size-up?
  • Fall factors >0.25 are not acceptable for what?
  • Which tool is described as listening devices (enhance sounds)?
  • What term describes a turn in a rope that crosses itself to create a closed loop?
  • Which option lists the ICS forms included in an Incident Action Plan (IAP)?
  • What are the hazard safety zones?
  • LZ should be identified when?
  • Once the aircraft has landed position yourself where?
  • Harnesses must adhere to what NFPA?
  • Tail rotor position is where
  • Define physical search.
  • IMS stands for what in emergency management?
  • Where is the hot zone in a rescue operation?
  • Which harness is described as a full body harness used for a two-person load?
  • US&R teams should use which guide during operations?
  • Which type of physical search is used to locate quick obvious victims?
  • Which role coordinates with assisting agencies?
  • In knot terminology, which component is the middle portion of the rope between the working end and the running end?
  • In trench and structural collapse incidents what PPE is appropriate?
  • Overhand knot (safety knot) is used for what?
  • Which PPE category addresses protection for the hands?
  • Which ICS form documents the Organization Assignment List?
  • Which ICS form is the Assignment List prepared by Squad Leader and NCOIC?
  • Hearing protection devices must conform to which standards?
  • Which statement represents an environmental hazard example?
  • Which statement best describes the resource cache?
  • What is the butterfly knot used for?
  • Load limit for Class I harness?
  • If an obstacle cannot be removed, what must be done to indicate the hazard?
  • Who works together to establish incident objectives and develop the IAP?
  • Which action best represents dressing the knot?
  • Which feature is listed as a characteristic of nylon rope but not specifically attributed to polyester in the material?
  • What is the maximum tail length recommended after tying a figure-eight on a bight safety knot?
  • What is the stated tensile strength for tubular webbing and flat webbing?
  • Which professionals might be called if water resources or electric capabilities are needed during size-up?
  • SCBA stands for
  • Rescuers exposed to any noise in excess of ____ dB must be provided with appropriate hearing protection devices, which should conform to ANSI S3.19 or S12.6 and have a noise reduction rating of at least ____ dB.
  • Class III harness is aka
  • During termination, which action involves sending reports to the IC and managing the transfer of responsibilities?
  • The static system safety factor must be greater than ___ to ___.
  • Which statement about Type II helicopters is true?
  • Head protection must conform to which NFPA standard?
  • Which knot is commonly used to secure a rope end and is also known as a safety knot?
  • What diameter in feet is recommended for a relatively level landing area?
  • ICS 205 Incident Radio Communications Plan is prepared by which group?
  • ICS 202 documents incident objectives and is prepared by which position?
  • Which of the following is NOT a hazard category?
  • Which section coordinates tactical operations?
  • Which ICS form is the incident briefing prepared by the US&R Team Leader?
  • Which property is listed for polyester rope?
  • Operations/Command Post area is where who is located?
  • What is the prusik hitch used for?
  • Which option lists the environmental hazards types?
  • Which knot is described as ideal for load-bearing rope-to-rope connections?
  • What types of lighting resources are referenced for field operations?
  • What is the size of the landing zone during daylight?
  • What describes the warm zone?
  • Which of the following is included in PPE types and selections?
  • NFPA 1983 establishes what?
  • The outer rope component term used in the material is which?
  • What is the girth hitch used for?
  • Managing and tracking resources including personnel and tools will be aided by early initiation of an ___ and ____ ____ ____
  • Which SAR component connects to the face piece via a low-pressure hose?
  • Which description best matches the Rehabilitation Area?
  • Which knot is used to join two pieces of webbing by connecting their ends in a flat, non-load-bearing seam?
  • Which term denotes a full wrap around an object, i.e., a complete turn?
  • The general staff of the ICS is comprised of which groups?
  • Which option is not listed as a tool for crowd control in the guidelines?
  • A class II harness can be used in rescues up to _____
  • Which areas are listed as 'Other areas of consideration' in operations?
  • What requirement must face and eye protection adhere to?
  • During termination, which task describes the role of the NCOIC/PSG?
  • Which of the following is an airborne contaminant?
  • Which end is actively used to create bends and tie knots?
  • Which statement correctly describes Type I helicopters?
  • Which form is the Medical Plan Form in the ICS set?
  • Which can last longer SAR or SCBA
  • Which knot is used to bind two ropes of the same diameter together, not load bearing?
  • What is the square knot used for?
  • Which knot is described as an anchor knot that can be tied around an object?
  • Which knot is designed to take a three directional pull?
  • What types of lighting resources are used in field operations?
  • What type of search divides the area into smaller blocks that can be assigned to individual teams?
  • In the given material, 1 k/N equals how many pounds?
  • Proper footwear should have what?
  • EX. if during a day approach a helicopter must fly over 40 foot trees the landing sight must be how many feet long?
  • Which term describes a full wrap around the rope?
  • What does load the knot mean?
  • SAR is used when
  • Which tool is described as seismic devices (sensitive to movement)?
  • What is the criterion for a risk/benefit analysis in emergency decision-making?
  • What can be used to mark the landing site but not be any closer than ___ feet to the touchdown point
  • ICS 203 Organization Assignment List is prepared by which role?
  • Obstacles greater than ___ inches high, deep, or wide that cannot be removed must be ____.
  • Which area is described as the Rescue Team Area, comprising the rescue squad leader and rescue specialist along with their mission?
  • Sheath damage occurs when which condition is met?
  • For an 8 mm accessory cord tied with a double overhand bend, what are the reported tensile strengths?
  • NFPA 1983 standard on elongation: At 10% of breaking strength, elongation must be no less than what percent and no more than what percent?
  • Which option is not a listed type of physical search?
  • ICS 208 Safety Message/Plan is prepared by which role?
  • How many people constitute the LZ team?
  • Which knot is used to join two ropes of equal (or slightly unequal) diameter together for load bearing applications?
  • The general staff of the Incident Command System is comprised of which components?
  • RIC/RIT stands for which of the following in rescue operations?
  • Always approach the helicopter on the ___ side.
  • Due to the lack of expertise in all fields, US&R will lean on whom to develop the IAP?
  • What is the role of the Public Information Officer?
  • Which term refers to the end of the rope used to make all of the bends to tie the knot?
  • What is a bight?
  • Where should the Rehabilitation Area be located relative to the incident site?
  • Equipment retrieval begins where and ends where?
  • Which ICS form is the operational planning worksheet prepared by the operations officer?
  • ICS 201 is the incident briefing prepared by which role?
  • What are the responsibilities of Squad Leaders?
  • If the fall factor is greater than ___ the rescuer should not use _____ rope.
  • Where should the overhand knot be placed relative to the primary knot?
  • Which term refers to loops on a harness used to attach equipment?
  • The skid and toe in landing provide pilots reference to their surroundings in which planes?
  • Under which ground slope angle should the aircraft land upslope when the slope is very gentle?
  • Which search method involves calling out and listening for sounds?
  • Who reports to the Team Leader within the US&R organization?
  • NFPA 1500 defines standards relating to what?
  • What is the distance to stay from the rotor for the 9 and 3 o'clock side positions?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy